UV Resistant &Single Component waterborne, resin-based Acrylic (elastomeric) Liquid Membrane
As it is elastic and quick-dry, sticking strongly to the surface, Tesla Master Suv 550 forms a layer which is elastic and resistant to water and moisture. Tesla Master Suv 550 is a waterproofing material which has component with 22 kg liquid and 8 kg fiber-supported in polyethylene bucket.
It is applied:
Application surface should be free from dust, dirt, rust and oil and the loose parts should be scraped. For good adhesion, a layer of primer should be applied to the concrete surfaces before application. Spikes should be rounded and areas suitable for cracking, such as horizontal / vertical joints, should be angled with waterproofing tape. Large pores and cracks should be filled with joint sealant.
Tesla Master Suv 550 is cold applied and ready to use in its package. Depending on weather conditions, it dries for about 6 to 8 hours. It is applied on moist but not wet surfaces. . It should not be applied in rainy weather or at temperatures below +5°C. The other layer should not be applied before one layer is completely dry. It is applied with brush or roller quickly and easily. It does not form seams.
Your email address will not be published. Required fields are marked *
Shelf Life / Storage
Protect from frost. Shelf life is up to 12 months in unopened and original packaging. The date of manufacture is on the packaging.
Consumption / Packaging
1,50 - 2,50 kg/m2(total for 2 layers)
5 kg and 17 kg polyethylene buckets
Keep out of reach of children (S2). Eyes and skin must be protected in all chemical studies (S24/25). Wear suitable gloves and goggles while working (S36/39).
Red / Green / White