Description

Waterborne, bitumen-rubber based, Single Component Liquid Membrane

Tesla Master BL 501 1K is a one-component, bitumen rubber based, quick drying and fully elastic waterproofing material. After the evaporation of the water in its content, sticking strongly to the surface, it forms a layer which is elastic  and resistant to water and moisture.

Application Areas

Tesla Master BL 501 1K  is used on all horizontal and vertical surfaces, foundation insulation and insulation of water leakage in wet areas such as bathroom, kitchen, toilet. It is used with equipment like waterproofing mesh with high alkaline resistance on cracked surfaces or in the insulation application where resistance to higher water pressure is required.

Surface Preparation

Application  surface should be free from dust, dirt, rust and oil and the loose parts should be scraped. For good adhesion, a layer of bitumen primer should be applied to the concrete surfaces as a primer before application. Spikes should be rounded and areas suitable for cracking, such as horizontal / vertical joints, should be angled with waterproofing tape.  Large pores and cracks should be filled with joint sealant.

Application

Tesla Master BL 501 1K is cold applied and ready to use in its package. Depending on weather conditions, it dries for about 6 to 8 hours. It is applied on moist but not wet surfaces. It should not be applied in rainy weather or at temperatures below +5°C. The other layer should not be applied before one layer is completely dry.