Description

Tile-Top Transition primer

It makes the surface rough thanks to its special fillings. It provides effective solutions for the use of tiles on tiles.

Application Areas:

It is used in all buildings, tile applications on tiles, plaster surfaces with high absorbency, plaster and concrete surfaces in order to prevent water absorption. Increasing the adhesion of the surface to which it is applied, it makes it rough.

Surface Preparation

Ambient temperature must be between +5 ° C and + 35 ° C. The surface must be clean, dry and solid. Materials affecting adhesion such as oil, rust, cement must be scraped from the surface. Application at very high  and  low temperatures must be avoided. The application should not be carried out in very hot and humid weather and in areas with excessive wind. Drying time is minimum 4 hours.

Application

Tesla Master Fay 09 (Tile-Top Transition primer) should be mixed with the help of a medium speed mixer until it is homogeneous. It is applied in single layer with a roller or brush. Before starting tile on tiles applications, the primer must be dry.